COMPANY HEADER
Request Information
The series 123-1 (2.3 inch diameter) permanent magnet step motors is available in 7.5 degree or 15 degree step angles, and can be wound for bipolar or unipolar drives. Motors that are wound for Bipolar drives can be run from an AC voltage source, using a capacitor to create a phase shift in the line voltage. This method creates a simple, low cost, reversing drive. Series 123-1 step motors can be custom wound for any voltage up to 240 V. Custom shafts and connectors are available.
Unit of Measure

Specifications

Alternating Current (AC) Voltage

 N/A 24 V

Voltage Type

 N/A AC

Frequency

 N/A 50 Hz60 Hz

Input Power

 N/A 8 W

Speed

 N/A 600 rpm

Start Torque

 N/A 3.4 in·oz

Stall Torque

 N/A 7.0 in·oz

Capacitor

 N/A 17.0 µFd

Motor Type

 N/A Motor Only

Typical Applications

 N/A ATM Machine Beverage Dispensing HVAC Control Instrument Controls Lighting Controls Medical Devices POP Displays Robotic Controls Sun Tracker Video Games/Gaming Machine Voting Machine

Standard Features

Standard Features

 N/A
  • Rigid construction
  • Motor and output sleeve bearings
  • Variable lead positioning
  • 130 ºC insulation
  • Step angle accuracy range between ±5º and ±1.0º
  • Available with 50 Hz windings

Optional Features

Optional Features

 N/A
  • Voltages up to 240 V
  • Ball bearings
  • Custom leads and terminations
  • Custom stepper motor outputs
  • Custom mounting
  • Custom shafting
  • Rear shaft extensions
  • Available with integrated driver/ controller