COMPANY HEADER
Request Information
Synchron 600 Series, K mount AC timing motors offer all of the features of our C mount unit but the deeper gear box allows more room for gearing so that we can achieve those extra slow speeds. The K mount unit can be geared down to a speed of 1 revolution per week. Various windings for either 24, 110 or 220 V AC and 50 or 60 Hz permit a wide range of application power sources. Shaft torque, rated at 1 rpm, ranges from 8 oz-in to 40 oz-in depending on the selected winding and he wattage rating (3, 4, 5 or 6 Watts). Maximum dynamic torque is generally limited to 30 oz-in, with a static output torque limit of 90 oz-in.
Unit of Measure

Specifications

Series

 N/A 600

Gearbox Type

 N/A Deep Pear Shaped Gearbox

Product Type

 N/A Synchron K Mount

Gear Train Ratio: 1

 N/A 432000

Speed at 60 Hz

 N/A 2 rev/day

Starting Torque (Rated Voltage) at 3 Watts

 N/A 20.0 in·oz

Motor Speed at 50 Hertz

 N/A 500 rpm

Motor Speed at 60 Hertz

 N/A 600 rpm

Coil Wattages

 N/A 3 W

Voltage

 N/A 12 to 277 V

Typical Applications

 N/A Chart Recorders Clocks Damper Controls Mechanical Timers POP Displays Time Stamps Valve Controls

Motor Options

 N/A Air Brake Option Dual Motor Option Standard Motor

Product Features

Product Features

 N/A
  • Motor Speed: Turns 600 RPM at 60 Hz and 500 RPM at 50 Hz
  • Impedance protected coils
  • Class B rated for insulation, Class F available as an option
  • AC voltage only
  • Available coil wattage 3 W at all fractional RPH speeds
  • Starting torque rated at 20 in-oz
  • Voltages from 12 V to 277 V available
  • Available in clockwise or counterclockwise rotation
  • Speeds from 10 revolutions per day to 1 revolution per week available
  • Wide selection of output option offerings
  • Connector/terminals available
  • Available with operational 1-way clutch for resetting or 2-way clutch for gear train protection, in all speeds using this mount

Additional Information

Additional Information

 N/A The motor is permanently lubricated and requires no maintenance during its lifetime. Gear material has been selected for the quiet operation and long life required in time measurement instrumentation and event recording applications.