COMPANY HEADER
Request Information
Designed for precise timing applications in appliances, instruments, event recorders and clocks, Synchron 600 Series AC timing motors are available in a round case configuration with either two-hole (Model-D) or four-hole (Model-A) mounting plates. Output speeds from the integral gearhead can be chosen from a range of 0.8 rpm to 360 rpm.
Unit of Measure

Specifications

Series

 N/A 600

Gearbox Type

 N/A Round Gearbox

Product Type

 N/A Synchron A & D Mount

Gear Train Ratio: 1

 N/A 300

Speed at 60 Hz

 N/A 2 rpm

Starting Torque (Rated Voltage) at 3 Watts

 N/A 4.0 in·oz

Starting Torque (Rated Voltage) at 4 Watts

 N/A 10.0 in·oz

Starting Torque (Rated Voltage) at 5 Watts

 N/A 15.0 in·oz

Starting Torque (Rated Voltage) at 6 Watts

 N/A 20.0 in·oz

Motor Speed at 50 Hertz

 N/A 500 rpm

Motor Speed at 60 Hertz

 N/A 600 rpm

Coil Wattages

 N/A 3 W4 W5 W6 W

Voltage

 N/A 12 to 277 V

Speed at 48 Revolution Per Hour

 N/A 360 rpm

Typical Applications

 N/A Chart Recorders Clocks Damper Controls Mechanical Timers POP Displays Time Stamps Valve Controls

Motor Options

 N/A Air Brake Option Dual Motor Option Standard Motor

Product Features

Product Features

 N/A
  • Motor Speed: Turns 600 RPM at 60 Hz and 500 RPM at 50 Hz
  • Impedance protected coils
  • Class B rated for insulation, Class F available as an option
  • AC voltage only
  • Motor speeds of 1 RPM and faster can be stalled without electrical or mechanical damage (as long as voltage supply is to spec)
  • Available Coil Wattages: 3 W, 4 W, 5 W, 6 W
  • Voltages from 12 V to 277 V available
  • Available in clockwise or counterclockwise rotation
  • Speeds from 360 RPM to 48 RPH available
  • Wide selection of output option offerings
  • Connector/terminals available
  • Four hole "A" or two hole "D" mounting option
  • Available with operational 1-way clutch for resetting or 2-way clutch for gear train protection, in 6 RPM and slower speeds

Additional Information

Additional Information

 N/A All motors with output speeds greater than 1 rpm can be stalled with no resulting mechanical or electrical damage. Shaft torque, rated at 1 rpm, ranges from 8 oz-in to 40 oz-in depending upon the selected winding and the wattage rating (3, 4, 5, or 6 Watts). Excitation voltage is selectable from the catalog standards of 24, 110, 220 V AC and 50 or 60 Hz or it can be customized to the application requirement. In OEM quantities, custom shaft configurations, lead lengths and lead connector terminations are welcomed.