COMPANY HEADER
Request Information
Synchron 600 Series, C mount, AC timing motors are the industry leader in applications requiring spring return capability. The Hansen Synchron motor distinguishes itself with low noise levels and a robust, precision gear train that can be stalled long term in output speeds of 1 RPM and faster with no damage to the motor.
Unit of Measure

Specifications

Series

 N/A 600

Gearbox Type

 N/A Shallow Pear Shaped Gearbox

Product Type

 N/A Synchron C Mount

Gear Train Ratio: 1

 N/A 600

Speed at 60 Hz

 N/A 1 rpm

Starting Torque (Rated Voltage) at 3 Watts

 N/A 8.0 in·oz

Starting Torque (Rated Voltage) at 4 Watts

 N/A 20.0 in·oz

Starting Torque (Rated Voltage) at 5 Watts

 N/A 30.0 in·oz

Starting Torque (Rated Voltage) at 6 Watts

 N/A 40.0 in·oz

Motor Speed at 50 Hertz

 N/A 500 rpm

Motor Speed at 60 Hertz

 N/A 600 rpm

Coil Wattages

 N/A 3 W4 W5 W6 W

Voltage

 N/A 12 to 277 V

Typical Applications

 N/A Chart Recorders Clocks Damper Controls Mechanical Timers POP Displays Time Stamps Valve Controls

Motor Options

 N/A Air Brake Option Dual Motor Option Standard Motor

Product Features

Product Features

 N/A
  • Motor Speed: Turns 600 RPM at 60 Hz and 500 RPM at 50 Hz
  • Impedance protected coils
  • Class B rated for insulation, Class F available as an option
  • AC voltage only
  • Motor speeds of 1 RPM and faster can be stalled without electrical or mechanical damage (as long as voltage supply is to spec)
  • Available Coil Wattages: 3 W, 4 W, 5 W, 6 W
  • Voltages from 12 V to 277 V available
  • Available in clockwise or counterclockwise rotation
  • Speeds from 360 to 12 revolutions per day available
  • Wide selection of output option offerings
  • Connector/terminals available
  • Available with operational 1-way clutch for resetting or 2-way clutch for gear train protection, in 6 RPM and slower speeds

Additional Information

Additional Information

 N/A That stall capability coupled with consistent, low reset torques make the Hansen Synchron motor ideally suited for motorized valve and damper applications. The motor can be powered to open or close the device and remain powered (stalled) as long as the system requires it . When de-energized a spring returns the valve or damper to it’s original position. This simple, reliable function continues to be a cost effective solution for valve and damper control decades after it was first introduced.

Also designed for precise timing applications in appliances, instruments, and event recorders, Synchron Series 600-Type C, AC timing motors from Hansen Corporation are available with precise synchronous speeds ranging from 0.50 revolution per hour to 360 rpm. Options include a 1-way clutch so that a reset function can be implemented, or with a 2-way clutch for gear train protection from excessive loads at output speeds below 6 rpm. The compact and quiet-running motor-gearbox package is permanently lubricated, and requires no maintenance during its lifetime. Shaft torque, rated at 1 rpm, ranges from 8 oz-in to 40 oz-in depending upon the selected winding and the wattage rating (3, 4, 5, or 6 Watts). Excitation voltage is selectable from the catalog standards of 24, 110, 220 V AC and 50 or 60 Hz or it can be customized to the application requirement. In OEM quantities, custom shaft configurations, lead lengths and lead connector terminations are welcomed.